Extron FOXBOX Rx HDMI Fiber Optic Receiver driver for Windows 7 - Extron FOXBOX Rx HDMI Fiber Optic Receiver driver

Extron FOXBOX Rx HDMI Fiber Optic Receiver 1.17

Extron FOXBOX Rx HDMI Fiber Optic Receiver driver from Extron for OS Independent

Extron FOXBOX Rx HDMI Fiber Optic Receiver driver from Extron for OS Independent

Publisher review for Extron FOXBOX Rx HDMI Fiber Optic Receiver 1.17:

Before install Extron FOXBOX Rx HDMI Fiber Optic Receiver 1.17you should set a system restore point, to make sure you can rollback to your original driver in case you accidentally install another driver or select the driver for another version of the operating system.

Also, do not forget to check with our site as often as possible for new version of Extron FOXBOX Rx HDMI Fiber Optic Receiver . We recommend to always use most recent version of a driver.

This package provides the necessary installation files of Extron FOXBOX Rx HDMI Fiber Optic Receiver Firmware 1.17. Fixes:- Fixed Image flashing issues when switching encrypted signals through a fiber matrix.
- Fixed color bit depth issue with DVS 605: When a connected DVS 605 would change from an 8-bit to a 10-bit color bit depth, the FOXBOX HDMI locked up.
0 Fixed image shift issue in non-plus mode: When the transmitter is set to non-plus mode, the image was shifted to the right at 1080p @60Hz, and distorted at 1024x768 @ 60Hz when connected to a FOXBOX RX HDMI or FOXBOX SR HDMI.
- Fixed Digital Audio distortion issue with Cisco tuner: When the HDMI input signal was switched, the 48 KHz clock was disrupted, causing a digital audio distortion with the Cisco tuner.
- Fixed Embedded Audio issue: The FOXBOX TX HDMI was unable to transmit embedded audio when connected to a FOXBOX RX HDMI using Extron HDMI-PC EDID with 2-CH audio files. The EDID now specifies 48 KHz audio sampling
- Improved Feature: Auto Output Format removes limited quantization option. When set for “Auto” Output Video Format, the unit used limited quantization range for SMPTE resolutions. To expand the compatibility with a wider range of sink devices, the “Auto” mode now outputs DVI to DVI sink devices, and HDMI RGB 444 Full Quantization to HDMI sink devices, regardless of the set output resolution
Installation steps:1. Open Firmware Loader to establish a connection between the computer and the device. The Add Device... dialog box opens.
2. Select FOXBOX unit from the Device Name drop-down list.
3. Select the method of connection from the Connection Method drop-down list.
4. Depending on the connection method, additional options appear. Make the appropriate selections for the current connection method.
5. Click Connect.
6. Click Browse in the New File Firmware (Optional) panel. The Open window opens.
7. In the Open window, navigate to the new firmware file, which has an .S19 extension, and click Open.
8. Click Add. The Add Device... dialog box closes and the device and firmware are listed in the Firmware Loader main window.
9. Click Begin to start the upload process.
10. Close Firmware Loader when the Remaining Time field shows 00.00.00 , the Progress column shows 100% , and the Status field shows completed.
ATTENTION:- Valid firmware files must have the file extension .S19. A file with any other extension is not a firmware upgrade for this device and could cause the device to stop functioning.

Operating system:
OS Independent